1) Measure the diameter of the roller and select the appropriate size from the chart above. If the roller size falls within the range of two different sizes, select the larger size for easier fitting and complete shrinkage.
2) This product is most effective when used as the sole covering on the roller. It may, however, be used over an fabric undercover. When selecting a size, be sure to take the thickness of the undercover, if any, into consideration.
3) New Mol shrinks for a tight fit around the diameter of the roller but must be sewn, wrapped, or tied on the ends to prevent side-to-side movement.
4) Full rolls may consist of 1 to 3 variable lengths of material totaling 20 yards, plus approximately 6% to compensate for any waste. Half rolls may consist of 1 or 2 lengths of material plus approximately 5% to compensate for any waste. Quarter rolls always consist of one continuous 5 yard (4.5m) length.